Serial Port ActiveX Control - FlowReplace

Set or get flags defining flow control stuff

LONG FlowReplace;

Property Value
FlowReplace can be set to one of the following values:

FlowReplace

[out] FlowReplace is a set of flags defining flow control stuff. Can be combination of the following flags:

Value	Meaning	Hex
SERIAL_AUTO_TRANSMIT	Use the XON/XOFF protocol based flow control for output.	0x01
SERIAL_AUTO_RECEIVE	Use the XON/XOFF protocol based flow control for input.	0x02
SERIAL_ERROR_CHAR	If set, the ErrorChar is placed in the stream of received characters on error conditions like buffer overflow, frame errors and so on.	0x04
SERIAL_NULL_STRIPPING	If set, the reception of a NULL character is ignored.	0x08
SERIAL_BREAK_CHAR	If set, the BreakChar is placed in the stream of received characters when a break condition was detected.	0x10
SERIAL_RTS_CONTROL	Enables the RTS line when the device is opened and leaves it on.	0x40
SERIAL_RTS_HANDSHAKE	Use the modem signal RTS for input flow control.	0x80