Set or get flags defining flow control stuff
Property Value
FlowReplace can be set to one of the following values:
| |
FlowReplace |
| |
|
[out] FlowReplace is a set of flags defining flow control stuff. Can be combination of the following flags: |
| |
|
| Value |
Meaning |
Hex |
| SERIAL_AUTO_TRANSMIT |
Use the XON/XOFF protocol based flow control for output. |
0x01
|
| SERIAL_AUTO_RECEIVE |
Use the XON/XOFF protocol based flow control for input. |
0x02
|
| SERIAL_ERROR_CHAR |
If set, the ErrorChar is placed in the stream of received characters on error
conditions like buffer overflow, frame errors and so on. |
0x04
|
| SERIAL_NULL_STRIPPING |
If set, the reception of a NULL character is ignored. |
0x08
|
| SERIAL_BREAK_CHAR |
If set, the BreakChar is placed in the stream of received characters when a
break condition was detected. |
0x10
|
| SERIAL_RTS_CONTROL |
Enables the RTS line when the device is opened and leaves it on. |
0x40
|
| SERIAL_RTS_HANDSHAKE |
Use the modem signal RTS for input flow control. |
0x80
|
|
See also
HandShake properties, XOnLimit properties, XOffLimit properties